Discount Bare-Tool Hitachi DS18DLP4 18-Volt Lithium-Ion 1/2-Inch Driver Drill (Tool Only, No Battery)

I have had one of these in the kit form for over 2 years and it hasn't failed me yet in the field. I have dropped it off ladders, bored lotsa holes and it looks well abused. The main thing is the batteries seem to be still holding their charge unlike the nicads and NiMH I have used in the past. Also the drill itself is working great as well. I really like the metal chuck and heft so I bought another one to replace another drill (14.4v Bosch) I rarely use cause I am using this one. Like the older drill the chuck seems well centered unlike the Bosch (out, new). I also have some of the Dewalt 18 volt tools that have their merits. If you buy this tool I recommend the 3.0AH batteries. I am planning to get some of the other tools (Impact Screw driver, jig saw) and one more with batteries for a total of 4 that should get me through a day or two. Using the side handle is a good idea on this drill. The Bosch will be retired for household duty for my father.Get more detail about Bare-Tool Hitachi DS18DLP4 18-Volt Lithium-Ion 1/2-Inch Driver Drill (Tool Only, No Battery).

Bare-Tool Denali 565034 18-Volt Cordless 1/2-Inch Hammer Drill (Tool Only, No Battery) Best Quality

This drill has been my constant companion since buying a home. I've used it to hang things, drill things, unscrew things, screw-in things, dismantle things, reconnect things, and even once as a flashlight -- kind of.

This drill has a pretty good heft but it's balanced so it's not unwieldy. It's a bit heavy, but I don't have any issues using it for a few hours.

Unlike some drills I've used, this one stays put when I set it on the battery pack, whether I set it on a hard floor or carpeted one. Its balance is very secure (you can't tip it over just touching or bumping it).

I haven't found much use in the rotating battery pack, but I am sure someday I'll run across something and then I'll be thankful for it. As it is now, it's a non-issue -- it clicks into place and stays put just fine (not sure why some have had problems with theirs) unless you turn it.

The addition of a light is kind of nice, but I wish there was a way to turn it on without having to pull the trigger; to have it be a flashlight *and* drill would be utterly divine.

If this drill ever dies, I will be looking into another Denali drill to replace it (unless of course this one turns into a flaming ball of molten plastic or something when it goes). For the price, you get a lot!Get more detail about Bare-Tool Denali 565034 18-Volt Cordless 1/2-Inch Hammer Drill (Tool Only, No Battery).

Buy Bare-Tool Makita BDF452Z 18-Volt LXT Lithium-Ion Cordless 1/2-Inch Driver/Drill (Tool Only, No Battery)

I had purchased the Mikita Impact Driver with the same batteries that this drill uses. The batteries last and charge quickly. Since I use these two tools around the house, having two batteries between the impact and the drill works out fine.

The one thing I have encountered (not sure it is severe enough to call it a complaint) is the grip on the chuck. The chuck is ribbed with small ridges. When tightening the chuck the drill is powerfull enough to spin the chuck in your hand and a couple times I have burned my hand from the friction.

Other than this very small "nit" the drill is great.Get more detail about Bare-Tool Makita BDF452Z 18-Volt LXT Lithium-Ion Cordless 1/2-Inch Driver/Drill (Tool Only, No Battery).

Bare-Tool DEWALT DC984B 14.4-Volt 1/2 inch Heavy-Duty XRP Cordless Hammerdrill/Drill/Driver (Tool Only, No Battery) Buy Now

I received this drill-driver in a combination pack with a DeWalt impact driver. The DC984 drill-driver has a serious chuck wobble right out of the box. I tried it with several drill bits to ensure I didn't have a bent or damaged bit - it is definitely the chuck. My options are to send it back to the retailer (but I want and need the impact driver!) or get it to an authorized service center over one hundred miles away. I've never had problems with DeWalt tools before, so this is my first experience with their extremely poor customer service. I'll be switching to Milwaukee!Get more detail about Bare-Tool DEWALT DC984B 14.4-Volt 1/2 inch Heavy-Duty XRP Cordless Hammerdrill/Drill/Driver (Tool Only, No Battery).

Order Bare-Tool DEWALT DC720KB 18-Volt Cordless 1/2-Inch Drill/Driver with Case (Tool Only, No Battery)

The drill is fantastic, it weighs less than the older version,and it has better torque power with a light, that it didn't have before. It cost at least 150 dollars cheaper. You can use it twice as long cause it only weighs 4lbs.4oz. You have the capability of drilling a little longer because of it not weigh very much.But the kicker is that it cost a whole lot less.Remember it is the dewalt cordless drill 1/2in.,18volt baretool,. I purchased this through amazon.com.Get more detail about Bare-Tool DEWALT DC720KB 18-Volt Cordless 1/2-Inch Drill/Driver with Case (Tool Only, No Battery).

Bare-Tool DEWALT DC759B 18-Volt Compact Drill (Tool Only, No Battery)

I bought this drill because of price and after I used it for some time and compared to my other Dewalt drills I should say this ones is only for light works. As a professional tool its useless because it limited to drilling, chunk design is outdated and motor itself cannot handle heavy loads.Get more detail about Bare-Tool DEWALT DC759B 18-Volt Compact Drill (Tool Only, No Battery).

Bare-Tool Milwaukee 0824-20 18-Volt Cordless V18 Lithium-Ion 1/2-Inch Hammer Drill (Tool Only, No Battery) Immediately

I like lighter duty hammer drills like this one from Milwaukee as I can turn off the hammer action and just use it as a drill. With the heavy duty commercial hammer drills I can turn off the rotation but not the hammer action and for some drill bits the hammer action will quickly destroy the drill's cutting tips or even knock them off (as they are brazed onto the tool). The hammer action of this drill is adequate for small holes in masonry which is where we have used this drill. For large holes we have moved away from the TCT core drills to the laser welded dry cutting diamond core bits, like the ones from Blue Boar and Husqvarna, where no hammer action is needed or recommended.

The drill is an excellent drill though a bit on the heavy side for extended overhead use (where a Makita is a better choice). The best feature of the drill is its ability to use old NiCads that I had from an older Milwaukee 18v drill. Milwaukee has recently started to sell its new "M series" lithium-ion cordless which are replacing the old "V series" drills like this one. The "V" drills work with either the V lithium-ion batteries or the old NiCad batteries, but the new "M" drills work only with the new "M" type lithium-ion batteries.

Over time it will become more difficult to find the "V" batteries as this was a pretty short model run by Milwaukee. Anyone buying a drill they want to be able to use and get new batteries for over the next 5-10 years would be better off getting the M18 or another brand that is more stable in this regard.

One aspect of this drill that is much better over the new M18 is the design of the second handle which can be positioned (like the DeWalt XRP) anywhere in a 360 degree arc. The new M18 side handle has to be 90 degrees, left or right side, to the drill handle is quite a bit more limiting.

A nice aspect of the new Milwaukee M18 lithium-ion drills is that there are 2 different sizes of power packs so a lighter one can be used by many people who will not need the amps of the full pack and have a lighter drill to work with and the recharge times are half as long for the smaller battery packs. Something that is a little curious is that the Makita lithium-ion battery packs charge in 15 minutes while the small Milwaukee M-type battery packs take 30 minutes and the large battery packs take over an hour to charge.

For most people the full kit will be a better deal but if you have an old Milwaukee 18v NiCad drill and want to gradually ease into lithium-ion this would on the surface seem like a good approach. Unfortunately with the new M-type drills that will not work with either Milwaukee Ni-Cad or Milwaukee V-type lithium ion batteries, this drill is a bit of a dead end and a dubious investment over the long run.

Having been bit in the past by manufacturers that stopped producing batteries for early NiCad drivers and drills I am now much more cautious and want to verify the easy availability of replacement batteries (at local stores) before making a purchase decision. Whether Makita products are better or not is up for debate but their replacement batteries have the widest distribution of any manufacturer which should be a consideration.

If you are chucking your old NiCad batteries there are places including Home Depot that have recycling bins which keeps the deadly cadmium out of local landfills and the water supply.

Get more detail about Bare-Tool Milwaukee 0824-20 18-Volt Cordless V18 Lithium-Ion 1/2-Inch Hammer Drill (Tool Only, No Battery).

Bare-Tool Milwaukee 2611-20 18-Volt Hammer Drill (Tool Only, No Battery) Best Quality

While it's counterpart M series driver drill lacks a bit in power this baby makes up the difference and more. I use this to drill my 2-1/8" lockset holes, about a half dozen here and there, no problem! And when on low, be careful she will hurt you if you don't have a steady grip.
Because of its extra weight I only use it for the heavy duty stuff or of course the hammer drill action. I use my smaller lightweight drills for everything else.
I bought the Milwaukee 5 piece combo kit a while back which had a rebate for an extra battery with the deal. Then I bought this hammer drill (bare tool only) for $99. On Amazon, haven't seen it that cheap since. The battery level indicator lights was the clench-er for me, that is sooooo sweet !!
Get more detail about Bare-Tool Milwaukee 2611-20 18-Volt Hammer Drill (Tool Only, No Battery).

Where To Buy Bare-Tool Milwaukee 2415-20 M12 12-Volt 3/8-Inch Cordless Right Angle Drill/Driver (Tool Only, No Battery)

If so you need this right angle drill. Compact, powerful, great ergonomics, and well thought out. Just what you would expect from Milwaukee Tool. This tool just adds to the versatility of the M12 series of tools that can be run from one lithium pack.Get more detail about Bare-Tool Milwaukee 2415-20 M12 12-Volt 3/8-Inch Cordless Right Angle Drill/Driver (Tool Only, No Battery).

Bare-Tool DEWALT DW960B 18-Volt Cordless Heavy Duty 3/8 Right-Angle Drill/Driver (Tool Only, No Battery)

If you need to work in tight places and already use the Dewalt 18 volt cordless tool system, this is the first 'extra' to get. When a regular drill/driver is too long this will get you in tight and has plenty of power is easy for one hand operation, including reversing direction.Get more detail about Bare-Tool DEWALT DW960B 18-Volt Cordless Heavy Duty 3/8 Right-Angle Drill/Driver (Tool Only, No Battery).

Where To Buy Bare-Tool Makita BDF451Z 18-Volt LXT Lithium-Ion Driver/Drill (Tool Only, No Battery)

I've used them all - Makita, Dewalt, Milwaukee, Panasonic, etc. I've never used the low-end junk that places like Menards sell - Skil, Kawasaki, Best Tools, etc. This is the best cordless drill I've ever owned. Money no option? This is your drill.Get more detail about Bare-Tool Makita BDF451Z 18-Volt LXT Lithium-Ion Driver/Drill (Tool Only, No Battery).

Bare-Tool Milwaukee 2410-20 M12 12-Volt 3/8-Inch Drill/Driver (Tool Only, No Battery) Order Now

Love the tool itself but the battery needs charging very quickly....does not last like the ratingGet more detail about Bare-Tool Milwaukee 2410-20 M12 12-Volt 3/8-Inch Drill/Driver (Tool Only, No Battery).

Bare-Tool Milwaukee 2601-20 M18 18-Volt Compact Driver/Drill (Tool Only, No Battery) Get it now!

A powerful, lightweight drill and driver. Despite buying and enjoying the use of a Hole Hawg prior to doing timber framing with Timberlok screws, I relied largely on the 2601-20 to complete the project. I work with two 2601s, and recommend the purchase of this 'tool only,' and would not hesitate to buy reconditioned Milwaukee equipment.

Milwaukee has done a superb job of combining power with light weight, compactness, and battery function. I like the belt clip also.

I look forward to the drill that beats this one, but can't imagine it.Get more detail about Bare-Tool Milwaukee 2601-20 M18 18-Volt Compact Driver/Drill (Tool Only, No Battery).

Save Bare-Tool Makita BDA350Z 18-Volt LXT Lithium-Ion Cordless 3/8-Inch Angle Drill (Tool Only, No Battery)

I'm an Audio/Video Installer which means I install all types of flat screen TVs, speakers, home theater systems, whole house audio, in residential and commercial properties. I have many MAKITA drills about 5. All for different purposes. Before buying this close quarter drill I considered the Milwaukee right angle drill. The Milwaukee is a great tool, just too large for my purposes. I needed something small, powerful and cordless. I climb in all kind of tight spots and sometimes a dangling cord can be a hazzard when working in a customer's home.

The Makita is solidly built, I like like the large trigger and it does the job. Makita should have supplied a rubber screw on handle it would minimize vibration. This thing does vibrate when drilling through a wooden stud. I also wish it had two speeds Slower speeds deliver more torque. If your driving screws or making small holes it works like a charm.

I bought the (tool only) because I have 3 (3amp Lithium ION batteries. Good tool. Sturdy and well built.

I'm pleased.Get more detail about Bare-Tool Makita BDA350Z 18-Volt LXT Lithium-Ion Cordless 3/8-Inch Angle Drill (Tool Only, No Battery).

Buy Bare-Tool Makita BHP454Z 18-Volt LXT Lithium-Ion Cordless 1/2-Inch Hammer Driver-Drill (Tool Only, No Battery)

This is my second drill like this, it feels hefty in the hand, has great toque and is easy to control. The lite is usefull. One small improvement would be some system of storing several bits on the unit, but overall a good drill.Get more detail about Bare-Tool Makita BHP454Z 18-Volt LXT Lithium-Ion Cordless 1/2-Inch Hammer Driver-Drill (Tool Only, No Battery).

Bare-Tool Makita BHP452Z 18-Volt LXT Lithium-Ion Cordless 1/2-Inch Hammer Driver-Drill (Tool Only, No Battery) Decide Now

My son was errecting a new greenhouse. 48X96. This required over 5000 tek screws and this drill went thru it like a champ! The quick charge is unbelievable. No work stopage waiting for charging. This one drill replaced a pair of B&D Firestorm drills and 4 batteries that refused to hold a charge. It was stolen from the job site a day after finishing, and I promtly bought a new one. I will not be without this drill!!Get more detail about Bare-Tool Makita BHP452Z 18-Volt LXT Lithium-Ion Cordless 1/2-Inch Hammer Driver-Drill (Tool Only, No Battery).

Discount Bare-Tool DEWALT DCD950B 18-Volt XRP 1/2-Inch Hammerdrill/Drill/Driver (Tool Only, No Battery)

I had an XRP that I used for 10 years and it was a great drill and it still runs but the case cracked on it and the drill tries to split in two when I use it. So i decided to order this one and I know De Walt has had some quality issues in the past but they have been fixed with this model. I have actually broke paddle bits with this drill. and the all metal chuck and shaft is great for long term usage.Get more detail about Bare-Tool DEWALT DCD950B 18-Volt XRP 1/2-Inch Hammerdrill/Drill/Driver (Tool Only, No Battery).